[amayausers.com] Re: Trademark "TM" on logos
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 27 Sep 2010 20:15:11 UT
This message was posted by gcannon on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1358.html#000003
Well, in that case, I just use a standard walk stitch to do the "TM", and the
same for the little circle around it as well. Depending on the size (usually
less than 1/4"), you will have to adjust stitch lenght. For a regular 1/4" one
I generally use a 12 point stitch lenghth with curve compensation turned on.
If you wants it to really be noticed, a retrace (or maybe even a bean stich)
could help you achieve the results that will satisfy this customer. Hope this
helps.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
