This message was posted by Big Dog on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/735.html#000007 Tina I know this is an old post but did you every get the problem lettering fixed? I've been fighting the same battle with a tall narrow font and I'm an Embird user too. I discovered a fix, it requires some manual editing, but it solves the problem. Using the font engine the lettering is just to narrow to completely fill certain parts of the letters, mainly the letter "A" in my case. The left leg didn't fill. Using studio open the EOF file and edit the problem letter by manually widening the stitch points in the object editor in the right panel. Be sure if there is an opening in the letter to highlight both parts of the letter when you edit, or you'll have to edit the opening separately which is a bit harder to do. Save the file with an altered file name and test. I've managed to get the lettering to fill in well even with lettering as small as .20 If you need more info or help, you can email me at jjastrz@xxxxxxxxx and I'll walk you through the process. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================