Ed, This appears to have solved the problem but I have not loaded many design today and it was occasionally accepting a new one then it would act up. Is it possible that the software could also cause another problem that I'm having with my XT. It's almost as if it does not recognize a thread break and keeps on going. I stopped using that machine with the intentions of calling tech support but I just haven't had the time yet. Lisa ----- Original Message ----- From: e3m@xxxxxxx To: amayausers@xxxxxxxxxxxxx Sent: Thursday, October 04, 2007 10:48 AM Subject: [amayausers.com] Re: Software Issues Lisa, Re-install your Amaya OS software. I think I've seen this before but it's been a long time. Simply insert the Melco software disk into the computer and only install the "Amaya Program Files". Those are all that are necessary. See if this doesn't solve your problem. I'm assuming one of your "essential Melco program files" is not 100% of what it supposed to be. Let us know if this works for you. Ed Orantes 504-258-6260 -------------- Original message from "Wolf Embroidery" <Wolfemb@xxxxxxxxxxxxx>: -------------- > Amaya OS is giving me some trouble. Once I open it and load a design I'm > good to go but then I try to load a new design and it will not take. I have > to close out and open again. > > Any Suggestions? > > Lisa Ridley > Wolf Embroidery > > =========================================================== > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: http://www.amayausers.com/boards > Subscribe/Unsubscribe: http://www.amayausers.com/list > > ===========================================================