[amayausers.com] Re: Pull comp
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 22 Apr 2012 06:19:31 UT
This message was posted by Mama Kass on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1598.html#000004
Jerome, most of my designs are satin columns so I am always looking for ways
to reduce puckering. I have a very early (5.something) version of design shop
that doesn't seem to have "fill" as an option for underlays on columns. If I
were to try to accomplish this by copying the element and changing the element
type to a fill, do you think this might work as an underlayment if I put in a
negative pull comp to make it slightly smaller? If so, what density should the
fill be? I hope this makes sense.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
