[amayausers] Re: Port Authority Sport-tek Mesh Shirts
- From: "Cheryl Rotter" <tsiemb@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 15 Jun 2006 09:48:20 -0700
Cindy,
I have also struggled with those same shirts. Here's what I do - two
layers of heavy cutaway with solvy on top. The backing is probably
overkill, but I got so tired of the issues of thread breaks and
puckering. Two layered for me. Make sure the backing and the shirt are
both smooth and taut (but not stretched) inside the hoop.
Cr
Cheryl Rotter
Team Sports Ink
5111 Grumann Dr. Ste #1B
Carson City, NV 89706
775-884-3550
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Cindy Chamberlin
Sent: Wednesday, June 14, 2006 6:44 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Port Authority Sport-tek Mesh Shirts
Hi, all
I just finished the job from hell trying to stitch on the
mesh
Sport-Tek shirts. The design sews well on other material so design not
an
issue. I know it is a settings or stabilizer issue. Any suggestions on
settings for sewing? Thanks
Cindy Chamberlin
Impressive Threads
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
