Try checking the bobbin tension, and since they're new, go through the maintenance procedure too. Both should help. GF ----- Original Message ----- From: webmaster@xxxxxxxxxxxxxx To: amayausers@xxxxxxxxxxxxx Sent: Monday, September 03, 2007 9:31 PM Subject: [amayausers.com] Re: Newbie Constant Threadbreaks This message was posted by EarlsEmbroidery on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/168.html Hello, Im a Newb with a 2-head amaya. (2004 OS and DSP+). unfortunately I had no training and I have no warranty, BUT, prior to purchase, I watched machines work a couple of jobs. I read entire OS manual 3 times and I figured out the basics. BUT I have been getting threadbreaks on both machines every 5-10 seconds of sewing any design. I changed all the needles and made sure they are straight. the machines sewed 1 design with only 1 thread break only once. consistent thread breaking ever since. the thread is kind of jumpy as the needle goes up and down. Ive tried different fabrics. it seems to have fewer thread breaks when sewing on denim. any help is appreciated. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =========================================================== =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================