[amayausers.com] New Post/Thread Notification: Machines & Hardware
- From: "AmayaUsers Discussion Boards" <theboards@xxxxxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 07 Oct 2014 12:57:00 +0000
Hello,
Greenwing has just posted in the Machines & Hardware forum of AmayaUsers
Discussion Boards under the title of Whoops. Needle hit hoop, NEED HELP.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?5913-Whoops-Needle-hit-hoop-NEED-HELP
Here is the message that has just been posted:
***************
If your talking about the presser foot hitting the needle.
Bend it back to its correct position.
The needle bar is the silver bar that the needle is mounted on. using the
needle clamp the part that has the screw in it that holds the needle in place.
You can gently bend the presser foot with a needle nose pliers. It should about
1/4 inch behind the needle.
Hitting something you may have bent it up and forward so you may need to bend
it down and back.
This may help
http://www.melco-service.com/source1/Presser_Foot_Adjustment.htm
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
