Hello,
danikasdad has just posted in the Machines & Hardware forum of AmayaUsers
Discussion Boards under the title of EMT 16 Breaking Needles on caps.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?6190-EMT-16-Breaking-Needles-on-caps
Here is the message that has just been posted:
***************
John I went back to my dealer for service and and there was a problem with
machine. The new rotary hook on the EMT-16 has a removable blade to cut thread
the one on my machine was mission a screw and blade was all loose. I can sew
flats hours on end now without no major issues. But still not happy with hats.
Thanks again for all your help
---Quote (Originally by John)---
I only go 2.25 inches tall max on designs. 99% of everything we sew on caps is
2" or less in height.
*Designs for hats need to be digitized specifically for hats.* That means they
are to run center out and bottom up when sewn. You digitizer should do this as
long as you specify the design is for hats.
And trust me ALL my designs that I get done are quality - paying too much has
nothing to do with it - but if you are happy, then great!
---End Quote---
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
