[amayausers] Re: Major thread problems shredding and looping

This message was posted by levelbest on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/80.html#000008

Oops.  I never said I was perfect.

Here is the exact information from my notes as taught by John Hanson at tech 
training:

Needle Orientation - Straight on is best.  Spec is 0-20% - 5% right nominal.  
If you think of a clock, by the time it gets to one minute, you are already 
past the spec.

Typically 50% of needles on all service calls are rotated wrong.
=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: