It is a Melco font. I have converted True Type fonts before and had a problem with the stitches coming out so I am being extra careful. Thanks ----- Original Message ----- From: HK Acree To: amayausers@xxxxxxxxxxxxx Sent: Friday, December 16, 2005 4:03 PM Subject: [amayausers] Re: Lock/Trim ? Russell Depends on whether you have converted your alphabets. There are lock stitches digitized in all the Melco alphabets. If you have not converted (removed) these you will not have any problems. Herb Royal Embroidery ----- Original Message ----- From: Russell Silva To: Amayausers Sent: Friday, December 16, 2005 12:16 PM Subject: [amayausers] Lock/Trim ? Hi all, I did some lettering using the Garamond font from DesignShop and under lock/Trim properties the lock setting was on none, am I going to have a problem with stitches coming out, if so what can I do about it before I give it to my customer? I usually have that setting to always by default but somehow it got changed back. Thanks in advance Russell Silva R. S. Embroidery 508-222-4433