Can the new XT main boards reset themselves to think that they are running an older Machine. Is there an explanation for loose cable connections on a new XT. Will an Old XT board in a machine clash with the rest of the electronics of a new XT Thanks in advance, Anand > Bob, > > > A tech came today and fixed the problem but it appears that some of the > plastic take up levers got slightly damaged when the machine went and > threw it self out of wack. When I was evaluating the Machine before > purchasing it some on another list said plastic metal plastic take your > pick. Their words are coming to haunt me. > > The machine is working but is not sewing as good as it used to. The > stitch quality has gone down. > > The way the machine throws its self out of wack from time to time > reminds me of the Toyota that that had similar problems. > > There is perhaps a defective chip some where in the electronics that is > playing up from time to time is my guess. Now that some of the other > parts of the machine are damaged as well. I am hoping that Melco comes > good and replaces this Machine for me I will be calling them again > tomorrow. > > Anand > > > > Anand =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================