[amayausers] Re: Leather
- From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 18 Dec 2006 09:27:49 -0700
Herb, Darlene,
If it is ultra suede, forget it, unless you open the seam on the lining and
iron on some special iron on backing, otherwise the ultra suede will
definitly tear around the edges.
Presser foot height is critical as you don't want to be leaving a "foot
print" in the leather from the bottom of the presser foot hammering away on
the leather.
Surprisingly, regular leather embroderies very well, the thicker the better.
Herb is right, the denser the design, the more chance you are going to
"punch out". Reduce densities, especially in the lettering and use a good
backing.........and, and,,,,,,,,
The only sure way to go about sewing on leather is to have a sample peice
for trial purposes and sew out the design on it, check it over around the
edges very closely, also in the centers of a's,b's ,e's g's etc, etc. I use
a magnifying glass to check leather with. Manual underlay--not auto, that is
kept away from the outside edge is the safest bet, so you are not doubling
up on the needle holes around the edges. Sew and verify and adjust
acordingly, its a pain, I know, but could save a $100.00 jacket and some
headaches.
Rod Springer
Rod & Sharon Springer
Embroidery Cottage
Melco EMT & Amaya Technician & Trainers
Design Shop Pro+ & Digitizing
Boise, ID 83713
208-938-3038
----- Original Message -----
From: "HK Acree" <hkacree@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Monday, December 18, 2006 8:44 AM
Subject: [amayausers] Re: Leather
> Darlene,
> Kind of facing the same dilemma. Have to do the motorcycle seat today. I
> know we need to address underlay but am not sure how much to decrease it.
> Also need to look at stitch lengths. If they are too short bad things are
> going to happen. Where is Ernie A. when we need him?
>
> Herb
> ----- Original Message -----
> From: "Darlene Weber" <image_maker31@xxxxxxxxx>
> To: "Amaya" <amayausers@xxxxxxxxxxxxx>
> Sent: Monday, December 18, 2006 7:34 AM
> Subject: [amayausers] Leather
>
>
>>I have to embroider a word on the leather sleeve of a Letter Jacket.
>> Does anyone have any advice or procedures they can share with me???
>> I really don't want to mess up a $100+ jacket!!
>>
>> Thanks,
>> Darlene
>> __________________________________________________
>> Do You Yahoo!?
>> Tired of spam? Yahoo! Mail has the best spam protection around
>> http://mail.yahoo.com
>>
>> ===========================================================
>>
>> The AmayaUsers Mailing List
>> Website: http://www.amayausers.com
>> Discussion Board: http://www.amayausers.com/boards
>> Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>> ===========================================================
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
