Can anyone tell me where I can buy Women's polos with sizes up to 4X? =20 Thanks! Debby Hahn Coyote Design, Inc. -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Ed Orantes Sent: Saturday, November 25, 2006 1:53 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Hat hoop design size Sorry List,... I forgot to send this directly to Ms. Beverly and not to the entire list. Thanks, Ed -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Ed Orantes Sent: Saturday, November 25, 2006 12:23 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Hat hoop design size Hey Ms. Beverly, Ed Orantes here. I was catching up on some old e-mails and I saw this one from you (see below). Just thought I'd mention this tid bit to you... The newer style Amaya XT's are claiming that you can sew up to 3 inches in height on a cap that will accept it. Now for me that means realistically you can sew up to 2.5 inches instead of the older 2.25 standard. Of course I don't think any cap would look good with a 3 inch design anyway, because it would start to look "gaudy" (spell?). But that's just my opinion. The Amaya XT's have a different cap frame driver that doesn't fit on the original Amayas. Hope this helps. Take care, Ed Orantes -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Beverly Thompson Sent: Wednesday, November 01, 2006 10:37 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Hat hoop design size You can only go about 2.25" in height on a cap. Regards, Beverly Thompson Perdido Beach embroidery ----- Original Message ----- From: <webmaster@xxxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Wednesday, November 01, 2006 7:59 PM Subject: [amayausers] Re: Hat hoop design size > This message was posted by Juli in Kona on AmayaUsers.com. PLEASE DO=20 > NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by=20 > clicking > here: > http://www.amayausers.com/boards/ultimatebb.php?/topic/2/40.html#000002 > > When I make a design 2.9" tall and bring it into OS in the hat hoop,=20 > it is outside the allowed area on both the top and bottom. So right=20 > there it i not going to work, no matter what cap I put in (or if I=20 > just hoop a flat piece of material). > > So, how do I get a sewing area with the full 3" height? The design I=20 > am working with has arched lettering on the top with just the "l"=20 > sticking up. o the design will work if I can just figure out how to=20 > get the ful 3". Is it possible that somehow the size got changed. =20 > There is only one hat hoop in the list of hoops. > > I am a rank beginner with this machine/OS so am reluctant to change=20 > defaults. And Murphy has taken up residence in my sewing room! I=20 > have had a power failure in the middle of a design, lousy thread,=20 > designs that are susposed to fit but don't, millions of thread breaks, > ad nausium. And I have gotten an error message that I can't find any=20 > explinaton for. > > I can really see the need for the training. I am starting to make a=20 > list of questions. > > What do you do about that seam down the front of the hat? I am=20 > getting lots of thread breaks there, And what actifeed setting do you > use for reg structured denim caps? > > Juli in Kona=20 > = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: http://www.amayausers.com/boards > Subscribe/Unsubscribe: http://www.amayausers.com/list > > = =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.409 / Virus Database: 268.13.21/511 - Release Date:=20 > 11/1/2006 > > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=20 The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=20 =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================