Hi Mike,
As a general rule I always sew out a sample of a design before running in
production if I never used that design before including digizing that I have
done. Have you run a sample yet? If not, it could be the way the digitizing
was done. Also, EXP files do not like to have the size changed like a OFM or
CND file. If the EXP was reduced in size, this is more than likely the
problem for the thread breaks. Tearaway backing should be good for just
about every jacket.
From: Mike Garber <agraphic2@xxxxxxxxxxxx>
To: amayausers list <amayausers@xxxxxxxxxxxxx>
Date: Thu, 01 Dec 2005 10:28:59 -0700
Is anybody sewing on a PA J763 Work Jacket? I have a .EXP logo sent from
another embroidery shop and I am sewing inside the 'port pocket' with one
piece of 1 oz tearaway. I am getting alot of thread breaks and I suspect the
design is bad. I'm sewing at MT of 5 and 6 on with the old rollers and sharp
75/11 needles. What MT is everyone using?
Mike