This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/3/317.html#000002 Cindy, Are you digitizing something really, really large? You may need to enlarge the "Project Workspace Area". On the right hand side of your screen, in the "Project View", double click on the highest level... called the "Project Level". This will get you into the "Project Properties". Once there, click on the tab entitled "Project". Here you will see fields that allow you to choose the size of your workspace. I believe the default is 10" x 10". (50"x50" in DS ver.9) Of course, when ever you display a hoop or change the size of the hoop displayed on the screen to something different, the workspace enlarges or reduces itself for you so to be an appropriate size. Try turning on the "Hoop Button" and choose an appropriate sized hoop and then see if you can see the entire bitmap on the screen. Reducing the size of a bitmap will retain graphic clarity but if you have to enlarge the bitmap, the quality of the graphic will suffer. Ed Orantes =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================