[amayausers] Re: Hoop System

We use the Hoopmaster also.  It works great but we don't have all the 
attachments for the different size hoops.
We started with the 15cm board and use it 90% of the time.
Mike

Eduardo Ruiz wrote:

>Hi:
>
>I want to know which hoop system is the best.
>
>Thank.
>
>Eduardo
>
>
>
>
>--- Rod or Sharon <springer37@xxxxxxxxxxxx> wrote:
>  
>
>>Amen!
>>
>>Rod
>>
>>----- Original Message ----- 
>>From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
>>To: <amayausers@xxxxxxxxxxxxx>
>>Sent: Saturday, March 26, 2005 12:58 PM
>>Subject: [amayausers] Re: Hats - Caps - WACF etc....
>>
>>
>>    
>>
>>>Caps in general are more difficult because you're
>>>      
>>>
>>working with a curved
>>    
>>
>>>surface. All of the suggestions about good
>>>      
>>>
>>digitizing, design size,
>>    
>>
>>>hooping etc are more important than brand of
>>>      
>>>
>>machine. I also agree with
>>    
>>
>>>Rod about the Conventional Cap Frame. They are
>>>      
>>>
>>easier to operate and it
>>    
>>
>>>frames the cap tighter across the needleplate. I
>>>      
>>>
>>personally would shelf
>>    
>>
>>>the WACF for wide designs only and run CCF for
>>>      
>>>
>>everyday use.
>>    
>>
>>>Janel Harris
>>>Dimensional Designs
>>>http://www.dimdesigns.com
>>>
>>>
>>>
>>>
>>>
>>>      
>>>
>>    
>>
>
>
>               
>__________________________________ 
>Do you Yahoo!? 
>Yahoo! Small Business - Try our new resources site!
>http://smallbusiness.yahoo.com/resources/ 
>
>
>
>  
>

Other related posts: