I don't have a XT (yet) so I don't know what the new frames look like. Was just thinking of general ideas of what it could be. Sorry I'm not more help. Aaron Sargent The Linen Barn linen@xxxxxxxxxxx 541-770-2957 Medford, OR ----- Original Message ----- From: "Brookside Designs" <vendors@xxxxxxxxxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Thursday, April 20, 2006 3:44 PM Subject: [amayausers] Re: Help with XT Cap Frames > Aaron, > > I don't understand why it's happening just now. We're into our 400th hat > this week and now it's like the frames won't hold the hats anymore. I'm > really at a loss. > > Kip > > -----Original Message----- > From: amayausers-bounce@xxxxxxxxxxxxx > [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Linen Barn > Sent: Thursday, April 20, 2006 6:13 PM > To: amayausers@xxxxxxxxxxxxx > Subject: [amayausers] Re: Help with XT Cap Frames > > Kip, > > Are you having troubles cause the stitch length is too long and its > vibrating from the long stitches? If so you should turn them into Split > Colums so you don't have those wide satin stitches. > > Aaron Sargent > The Linen Barn > linen@xxxxxxxxxxx > 541-770-2957 > Medford, OR > ----- Original Message ----- > From: "Brookside Designs" <vendors@xxxxxxxxxxxxxxxxxxxx> > To: <amayausers@xxxxxxxxxxxxx> > Sent: Thursday, April 20, 2006 2:04 PM > Subject: [amayausers] Help with XT Cap Frames > > >>I need some help with the new XT cap frames. I'm doing a bunch of Little >> League caps that basically consist of just wording (sponsors names). All >> the words are made with column stitches and on some of the hats that have >> a >> pretty thick font, the clip for the strap keeps coming unfastened causing >> the hat to come loose from the frame. >> >> I've tried tightening the strap down, I've tried slowing the machine >> down. >> It still keeps coming unfastened. >> >> Any thoughts??? >> >> Kip Biddle, partner >> Brookside Designs >> Dansville, New York >> >> >> > > >