This message was posted by TinaK on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/653.html#000004 Debbie: This is what the manual says for Powering up the Amaya for the first time... 1. Machines are all off. 2. Open Amaya OS 3. Select - Tools>Options then the Ethernet tab. Check to make sure Ethernet adapter/card is connected to your machine is selected. Then turn on Force Download. 4. Configuration>Machine Config Wizard to start the config wizard. 5. The wizard will guide you through the steps required to configure your machine. 6. After the configuration click Finish on the last screen the wizard will close and OS will open reflecting the new configuration. Hope this helps and good luck! =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================