This message was posted by Zeraq,LLC on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/154/2.html#000019 Thanks to all, I got this thing to work finally. This is what I wound up with that is doing OK, meaning no holes. I don't think this is optimized but it works and I'm leaving it alone. Already did about 20 sew outs! Lettering short stiches off stitch length 15 no extra underlay density 5.0 Reduced density of main design (not center) 1 sheet solvey 4 mm backing speed 800 needles 65/9 slightly looser hooping Herb, I think your suggestion would improve overall quality as I feel I am at lower end of fill density. If I run this again I may try it. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================