[amayausers.com] Re: Font problem
- From: Darlene Weber <image_maker31@xxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 8 Dec 2008 13:17:05 -0800 (PST)
thanks Roland, I will give this a try. Actually the numbers are 2" tall.
--- On Mon, 12/8/08, Roland R. Irish III <signman@xxxxxxxxxxxxxxxxxxx> wrote:
From: Roland R. Irish III <signman@xxxxxxxxxxxxxxxxxxx>
Subject: [amayausers.com] Re: Font problem
To: amayausers@xxxxxxxxxxxxx
Date: Monday, December 8, 2008, 1:49 PM
My thoughts....
your density is too tight, and going around the 'corners' is making a pucker.
If the letters/numbers are above 1/2" tall, make sure 'short stitches' is ON.
Also, try adding .3 to your density...if you are running 4.5, go to 4.8,
etc.-I'm
doing that right now as I fine tune a sweatshirt logo design to relieve the
puckering on some tight letters.
Roland
On Dec 8, 2008, at 2:29 PM, Darlene Weber wrote:
Can anyone give me some suggestions on this problem???
Thanks!
--- On Fri, 12/5/08, Darlene Weber <image_maker31@xxxxxxxxx> wrote:
From: Darlene Weber <image_maker31@xxxxxxxxx>
Subject: [amayausers.com] Font problem
To: "Amaya" <amayausers@xxxxxxxxxxxxx>
Date: Friday, December 5, 2008, 5:53 PM
I have been trying to use the number "0" from Melco's fonts Athletic Block 2
color. Everytime I try to use the 0, I get a pucker at the top of the right
side and the bottom of the left side of the number. I am trying to sew this on
tshirts and have tried to use stronger backing and solvy, etc. I am using a
fill stitch.
Please help me!
Other related posts:
