This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/261.html#000001 1) your design was not centered in Design Shop in the 'window'. Go back and click on the 'centerline' button and see. If it isn't, 'view, select all' and move it until it is dead center 2) 'hoop' itself may have been moved on your last job to lineup something, and you never reset it. Click on 'center hoop' 3) in amaya OS window, 'center design' after centering hoop Any one, or all three of these, should bring it back to center. We learned to always center the design in Design Shop before 'loading' it, then centering hoop, center design, and trace design. And, you may have the wrong hoop size selected-double check that. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================