This message was posted by Juli in Kona on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/3/765/2.html#000016 I have virtually stopped using the spray adhesive, but I still have it. I don't do many big design so really don't need it. If you are OK with doing the WD-40 wash, and need to use the spray for your applications, then it is perfectly all right to use it. It will get behind the rotary, but that didn't seem to matter. I just mentioned it because I had thought that I had gotten all of it out and years later it was still there. Who is ABS? I don't have any super soft tear-away and should probably have some on hand. Juli in Kona =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================