THANKS!!!! That did it! Had solved the rest of the problems! Bill =20 William A. Griffin Roanoke Bible College Elizabeth City, N. C 27909 252.334.2001 252.335.2321 -home www.roanokebible.edu -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Edna Khalifeh Sent: Sunday, October 15, 2006 4:33 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Beginning problems Just wondering, have you centered the hoop on the machine itself? I now do this before loading a design and again after selecting a new hoop in the OS. Edna Khalifeh -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Griffin William Sent: Sunday, October 15, 2006 3:27 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Beginning problems Thanks, Russell. I now understand the second one. -- That is, the old design stays on screen until another is loaded. However, the first one does not work. I have gone back, centered the design, chosen the 8.19 circular hoop, saved it as a new design. But when I load it in the machine, it comes up with the large rectangle hoop, and it is positioned way to the left of center--so far to the left of center that when I trace it on the 8.19 circular hoop, it is basically outside the hoop. Any further suggestions? Bill =3D20 William A. Griffin Roanoke Bible College Elizabeth City, N. C 27909 252.334.2001 252.335.2321 -home www.roanokebible.edu -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Russell Silva Sent: Sunday, October 15, 2006 3:57 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: Beginning problems Hi Bill, Problem a) Make sure you center the design in DesignShop before you save it,=3D20 it is the button with the circle and 4 arrows pointing inwards. Problem b) Use the reset design button then you will be able to load another=3D20 design. if you hover the pointer over the buttons in the OS and DesignShop it will=3D20 tell you what they are. Russell Silva R. S. Embroidery Amaya Technition Attleboro, Ma 508-222-4433 ----- Original Message -----=3D20 From: "Griffin William" <wag@xxxxxxxxxxxxxxxx> To: <Amayausers@xxxxxxxxxxxxx> Sent: Sunday, October 15, 2006 3:31 PM Subject: [amayausers] Beginning problems >I am a newbie. > > Just bought a used machine but bought the upgrades for the software. > > I seem to be doing well in DesignShop. > > However, I am having trouble in the OS/and the machine. > > Two problems: > a) When I load a design to be stitched out, it loads the design > all of the way on the left and thus hits the hoops, thus will not > stitch. (I cannot center it.) > b) I can not delete the sent design from the work load. When I hit > the "x" at the right corner (the means of closing a design), it > registers at the bottom that this is to close and give option for > saving, but nothing happens. It stays there. I can only close out the > whole program (OS). But, when I reopen, that same design comes up > again-still off center. > > Does anyone have suggestions? > > Bill > > William A. Griffin > Roanoke Bible College > Elizabeth City, N. C 27909 > 252.334.2001 > 252.335.2321 -home > www.roanokebible.edu > > =3D =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D =3D3D=3D =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D =3D3D=3D =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: http://www.amayausers.com/boards > Subscribe/Unsubscribe: http://www.amayausers.com/list > > =3D =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D =3D3D=3D =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D =3D3D=3D =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D >=3D20 =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D =3D3D=3D =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D =3D3D=3D =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D20 The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D =3D3D=3D =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D= 3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D =3D3D=3D =3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D3D=3D20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=20 The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=20 =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=20 The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=20 =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================