[amayausers.com] Re: Acti-Feed not working
- From: webmaster@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 24 Aug 2008 21:45:42 UT
This message was posted by Medusa on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/480.html
I have tried re-install, clean and lube all the way to 10 million (twice),
re-boot, I don't know what's next. I have an Amaya big red with the
cylyndrical arm. I think that's an XT but it's red and white...I also have
another Amaya big red with the flat style.
The acti-feed seems to be pushing way tooo muchb thread. I run at 1200 and no
thread breaks, but constant false bobbin breaks. I slow it down at all and
the thread snaps constantly. I try to auto feed and it always drops to 1 and
the thread feed is erratic. I do standard and it does the same thing.
Pleas help if you have any ideas.
Erik
Medusa Embroidery
Avondale, AZ
623-935-7557
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
