Tom, I have never had a maintenance timer go off at the ideal time...so I reset, note the required maintenance and then at the end of that day go and perform following the book instructions....and as far as the 200,000 oiling of the hook..I do not follow the timer. i oil every two hours of operation or sooner depending on the machine sound. Sorry i can't tell you if I have noticed 2005 changes Dana @ Ram Printing & Promotions Inc. (780) 875-5073 www.ramprinting.net ----- Original Message ----- From: Tom Buckner <tbuckner@xxxxxxxxxxx> Date: Tuesday, March 1, 2005 6:58 pm Subject: [amayausers] 2005 Design Shop and OS > Just curious as to whether or not anyone else has noticed the 2005 > OS system > does quite a few things differently when performing the maintenance > checks.For instance when doing the 200K maintenance the hook used > to rotate three > times after a drop of oil was put on it, now it zips through 6 or > sevenrotations. Just about every maintenance in terval on our > machines up to and > including the 4M interval has changed. Obviously they have done > this for a > reason and maybe they should pass on this to those running earlier > versionsto take advantage of what they've learned. > > > Thomas Buckner > > tbuckner@xxxxxxxxxxx > > www.ibistek.com > > > > > > >