[access-uk] Re: to ibrahim about ghost

  • From: "Ibrahim Gucukoglu" <ibrahim_gucukoglu@xxxxxxxx>
  • To: <access-uk@xxxxxxxxxxxxx>
  • Date: Fri, 6 Feb 2009 12:18:51 -0000

Hi Carol.

As far as I'm aware, you can use the program unlimited for a period of 30 days 
before you have to pay for it.  I can't tell if there are any restrictions but 
I will investigate this and inform you if I find out what they are.  As for the 
demo, there are two demo files, one is creating an image and one is recovering, 
so check them both out.  The recovery process is extremely straight forward 
however as the first dvd or cd you use is made bootable by the program and will 
wipe and completely restore the computer to the backed up state with a couple 
of keystrokes.

All the best, Ibrahim.


  ----- Original Message ----- 
  From: Carol Pearson 
  To: access-uk@xxxxxxxxxxxxx 
  Sent: Friday, February 06, 2009 12:02 PM
  Subject: [access-uk] Re: to ibrahim about ghost


  I've listened to the demo and read about the programme.  How does this 
compare with Norton Ghost in terms of restoring an image?

  I note the programme is shareware, but what can you and can't you do before 
purchase?

  --
  Carol
  carol.pearson29@xxxxxxxxxxxxxx

    ----- Original Message ----- 
    From: Negoslav Sabev 
    To: access-uk@xxxxxxxxxxxxx 
    Sent: Friday, February 06, 2009 5:57 AM
    Subject: [access-uk] Re: to ibrahim about ghost


    There is at least one accessible imaging program that you can use to make 
an image of your system and to restore it without sighted help. It's called 
image for windows and you can read mor at.

    http://www.accessible-devices.com/ImageForWindows.html

    Negoslav


      ----- Original Message ----- 
      From: john coley 
      To: access-uk@xxxxxxxxxxxxx 
      Sent: Thursday, February 05, 2009 11:58 PM
      Subject: [access-uk] Re: to ibrahim about ghost


      Hi Ibrahim, given the inaccessibility of imaging programs you'd be much 
better served to make an unattended windows install. You can incorporate 
drivers and slipstream service packs and updates using NLite. OK, you'll have 
to install all your programs etc, and recompile your address book, but that's 
nothing. As for jaws you can save your settings, and put them in a folder along 
with all your programs which you can then put onto a cd so that everything's 
ready to hand.
        In case you haven't had any experience of building an unattended 
windows cd you can learn all about it here.
      http://www.pcstats.com/articleview.cfm?articleID=1703
                      good luck,
                          John.

        ----- Original Message ----- 
        From: Ibrahim Gucukoglu 
        To: access-uk@xxxxxxxxxxxxx 
        Sent: Thursday, February 05, 2009 9:08 PM
        Subject: [access-uk] Re: to ibrahim about ghost


        Hi Lyn.

        Its quite OK, you've been very helpful and I much appreciate your time 
and commitment to finding out an answer to my enquiry.  The reason I was 
interested was because I wanted to make a DVD of my system in what I call a 
clean state IE windows XP installed, drivers and necessary utilities and the 
like all preconfigured and ready to put access tech on along with the everyday 
software I used.  I was hoping I could just insert the DVD after wiping my 
system clear of data completely and that a complete image of my hard drive 
including partition structure and files be placed automatically without me 
having to manually intervene or answer any questions.  Since NG may need 
command lines and as I don't have a floppy disk drive for my laptop, I don't 
think this solution is the most practical for me.  If anyone reading this 
message does know of a solution similar to that I am looking for, kindly let me 
know and I will investigate.

        Thanks once again for your support.


          ----- Original Message ----- 
          From: Lyn & Twinny 
          To: access UK 
          Sent: Thursday, February 05, 2009 8:55 PM
          Subject: [access-uk] to ibrahim about ghost


          Hi Ibrahim,
          I asked a computer instructor about your question related to Norton 
Ghost 2003. He did tell me that you can definitely create boot up floppies and 
that there is a way to put the image of that floppy onto a CD but he can't 
remember how to do it as it is rather involved. As for an unattended install of 
your image, you have to enter command lines but he has no clue as to how this 
is done. I am sorry I am not able to help there. I can try and find out for you 
if you like. However, if your Windows is still operational, you can definitely 
restore an image yourself without sighted asistance, this is what I do.
          Take care,
          Lyn & Twinny

Other related posts: