[access-uk] Re: firm ware.
- From: "Andrew Hodgson" <andrew@xxxxxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Tue, 25 Jan 2005 19:09:26 -0000
Hi Daman,
See the answer from George on this one. I had been told that the
material could not be coppied from the disk onto another disk or hard
disk and read using a daisy player, as Sarah says the Daisy data is
encrypted but it is too expensive on processor time (especially on a
hardware player) to encrypt the audio, so you would hear the audio part,
but in filename order not in the order that was meant to be played.
This is similar to the RFBD system, but in that case the AUK is on the
player itself not on the disk.
Andrew.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx]
Sent: 25 January 2005 09:38
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: firm ware.
Andrew ...
Important question that you or others might be able to answer.
I'm thinking here about the NLB synthetic voice book pilot that they're
running.
When you put the disk in, a spoken message tells you that it's searching
for an authorisation key. Would this key be different if you installed
the US version firmware? Does it search for the same authorisation key
no matter where you are on the planet? Or is this more tied to the
country you're in for copyright reasons?
Thanks
BooksBeforeWeDie.com
...Damon
-----Original Message-----
From: Andrew Hodgson [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Andrew Hodgson
Sent: 25 January 2005 08:56
To: access-uk@xxxxxxxxxxxxx
Subject: RE: [access-uk] firm ware.
Hi Billy,
If you have one of the newer players, then the update is applicable to
you. These are the players with buttons and not knobs to choose speed,
volume etc. If you have the older player with knobs, do not even think
of using this update:
http://www.visuaide.com/update/victorupdateclas102.en.html
If you have the older player, it is on firmware 2.2.4, which most people
have as its a year or two old now. It can be obtained from:
http://www.visuaide.com/update/victorupdateclas100.en.html
There is a new version of the firmware which will be coming out soon for
the older player.
Note as I said on the daisy-users list, its only available in American
prompts currently since the UK prompts have not been updated to reflect
the changes.
Andrew.
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx on behalf of TrueBlue & Proud
Sent: Tue 25/01/2005 08:06
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] firm ware.
hi guys, anyone know where I can get the new firm ware for Victor
Classic. Billy
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.1 - Release Date: 19/01/2005
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
http://www.bbc.co.uk/
This e-mail (and any attachments) is confidential and may contain
personal views which are not the views of the BBC unless specifically
stated.
If you have received it in error, please delete it from your system.
Do not use, copy or disclose the information in any way nor act in
reliance on it and notify the sender immediately. Please note that the
BBC monitors e-mails sent or received.
Further communication will signify your consent to this.
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
