Did you eventually get the now and next banner on the channel you are watching to work then? On Oct 20, 2010, at 8:54 PM, Peter Holdstock wrote: > Hi, OK been playing with this for a few hours now. I'm actually finding I'm > flicking through recorded programmes and channels to watch quickly now so am > happy I bought it. It does announce if something is audio described when you > press the info button. It announces the time every hour and also announces > the programme name as the next programme starts. I've had a couple of times > when it stopped talking but then began again but not sure why. Even just > being able to hear the channel numbers and names means I can now quickly > navigate to channels I like once I learn the numbers. The only thing I don't > like is that the speech talks over the bleep which tells you a programme is > audio described. Whilst the unit is speaking the sound from the sky box is > completely muted but I would have prefered it if it just reduced the volume > rather than stopping the sky output altogether. The unit also says no audio > output when you go in to the menus so that's quite useful to know that the > menu has indeed come up. > Hope that helps. > Peter > > -------------------------------------------------- > From: "Peter Holdstock" <peterholdstock@xxxxxxx> > Sent: Tuesday, October 19, 2010 7:02 PM > To: <access-uk@xxxxxxxxxxxxx> > Subject: [access-uk] Re: got my sky talker > >> Hi, just got my Sky Talker. There are basically three buttons. Two volume >> buttons on the top right and one power button on the front panel in the >> center. The box turns on and off automatically as you turn your sky box on >> and off. >> On the back there are two cables. One is a scart cable and the other is a >> serial cable. The scart cable replaces the scart lead which goes in your sky >> box. Then plug the scart lead from your tv in to the back of the thing you >> just plugged in to the scart socket on your sky box. Then plug the serial >> cable in to the serial port on your sky box. Mine is to the right of the >> scart socket as you look at the front of the box. >> Now your good to just turn on your sky box and it will work although mine >> took a few seconds to start working initially. >> To change the voice or it's rate hold down the power button until it says >> entering setup menu. Then just use volume keys to change. Presss power >> button once again to move to the voice speed and again use volume keys. >> Then press and hold power button to exit setup menu. >> That's all there is to it. >> It's not perfect. You hear the name of the channel,, programme name as you >> move through channels. You don't hear any input about the recorded >> programmes until you play them, at which point it tells you the channel name >> and programme name. Press i and it will read the info. >> Hope that helps. >> Peter >> >> >> -------------------------------------------------- >> From: "John Gallagher" <john@xxxxxxxxxxxxxxxxxxxxxxx> >> Sent: Tuesday, October 19, 2010 12:09 PM >> To: <access-uk@xxxxxxxxxxxxx> >> Subject: [access-uk] got my sky talker >> >>> Hi all just received my sky talker and scanned the manual now will have a >>> look and see how to connect it up. >>> >>> ** To leave the list, click on the immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** access-uk-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to >>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >>> >>> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** access-uk-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to >> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq >> > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq