[access-uk] Re: DVD UNDER XP
- From: "Joe Hunter" <jjjgidlow@xxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Sun, 22 Jul 2007 22:10:48 +0100
hi george i had the burner fitted by a tecky and the softwhare came with it.
I did however, use the normal windows copying conventions to burn as I thought
on to the cdr. it looks as if what i am seeing is what the burn list is and
actually have to instruct the burner to copy as directed there may be a few
coasters in the making me thinks. thanks george anyway.
joe..---- Original Message -----
From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
To: <access-uk@xxxxxxxxxxxxx>
Sent: Sunday, July 22, 2007 10:18 PM
Subject: [access-uk] Re: DVD UNDER XP
> What software are you using to burn the CDs? Have you told
> it that you have a new burner? If not, it's possible it
> could be just a tad confused being driven by the wrong
> settings.
>
> George.
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx
> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Joe Hunter
> Sent: Sunday, July 22, 2007 7:55 PM
> To: access-uk@xxxxxxxxxxxxx
> Subject: [access-uk] Re: DVD UNDER XP
>
> George I pulled a new cdr from
> a new pack and found that though i could store a txt file on
> the cdr, when I took the disk out it then showed nothing
> when I put the disk back in. I was fooled I think as the
> burner automaticly burns what's in the buffers ie my last
> txt file i burned.this is a bit confusing
> joe.
> ----- Original Message -----
> From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
> To: <access-uk@xxxxxxxxxxxxx>
> Sent: Sunday, July 22, 2007 7:42 PM
> Subject: [access-uk] Re: DVD UNDER XP
>
>
>> Then you MUST have a CD-RW in the drive.
>>
>> Try a known CD-R.
>>
>> George.
>>
>> -----Original Message-----
>> From: access-uk@xxxxxxxxxxxxx
>> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Joe Hunter
>> Sent: Sunday, July 22, 2007 7:41 PM
>> To: access-uk@xxxxxxxxxxxxx
>> Subject: [access-uk] Re: DVD UNDER XP
>>
>> hi George yes I have written a tx file to it and I can
>> delete it as if it were on a hard disk.t
>> ----- Original Message -----
>> From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
>> To: <access-uk@xxxxxxxxxxxxx>
>> Sent: Sunday, July 22, 2007 7:29 PM
>> Subject: [access-uk] Re: DVD UNDER XP
>>
>>
>>> Have you tried writing a few files to it, and then one or
>>> more of them?
>>>
>>> George.
>>>
>>> -----Original Message-----
>>> From: access-uk@xxxxxxxxxxxxx
>>> [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Joe Hunter
>>> Sent: Sunday, July 22, 2007 7:08 PM
>>> To: access-uk@xxxxxxxxxxxxx
>>> Subject: [access-uk] DVD UNDER XP
>>>
>>> Hello all,
>>>
>>> I am running XP with a dvd burner and I am wondering if
>> this
>>> behavior is right. I did have once a ordinary burner and
>>> would place a Cdr. in the old burner and if i tried to
>>> delete it the error message would come up informing me
>> that
>>> I could only store and not delete this file or files. in
>> my
>>> new dvd burner I can place a Cdr. and the drive acts as
> if
>>> it is a hard disk saving files and deleting accordingly.
>> is
>>> this the right behavior for a dvd burner.
>>> joe.
>>> ** To leave the list, click on the immediately-following
>>> link:-
>>> **
>>>
>>
> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click
> on
>>> the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>>> ** To leave the list, click on the immediately-following
>> link:-
>>> **
>>
> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** access-uk-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click
> on
>> the
>>> ** immediately-following link:-
>>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to
>>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>>
>> ** To leave the list, click on the immediately-following
>> link:-
>> **
>>
> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on
>> the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>> ** To leave the list, click on the immediately-following
> link:-
>> **
> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** access-uk-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on
> the
>> ** immediately-following link:-
>> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>>
> ** To leave the list, click on the immediately-following
> link:-
> **
> [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on
> the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** access-uk-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
