Hi Amro, I believe you can even turn off the graphical interface in setup. You don't have to reinstall again. It is somewhere in tools, if you hit Control-Tab there, I think you will find it. If not, let me know, and I'll check more thoroughly, as Mike Lawler of GW told me how to turn off graphics after installation, so I have a note of it. All the best -- Computer Room Services: the long cane for blind computer users. Telephone Voice: +44(0)1438 742286, Fax/BBS: +44(0)1438 759589 mobile: +44(0)7956 334938, Email: Steve@xxxxxxxxxxxxxx Web site: http://www.comproom.co.uk -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Amro Bilal Sent: 24 October 2005 14:02 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: Couple of NOD32 Difficulties Thanks Steve. I'll give that ago when I get home though I think Simon cracked it. Please see my other message; you might have something more to contribute. Cheers, AmroB ----- Original Message ----- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Monday, October 24, 2005 8:34 AM Subject: [access-uk] Re: Couple of NOD32 Difficulties > Hi Amro, > > To read the log, open it with right arrow, and then press control-tab. > > The other issue of changing the status of an item in Tools is easy too. > Just arrow to it, press control tab to see its status, then press Alt-S to > get you into that utility's setup. > > All the best > -- > Computer Room Services: the long cane for blind computer users. > Telephone Voice: +44(0)1438 742286, Fax/BBS: +44(0)1438 759589 > mobile: +44(0)7956 334938, > Email: Steve@xxxxxxxxxxxxxx > Web site: http://www.comproom.co.uk > > -----Original Message----- > From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf > Of > Amro Bilal > Sent: 23 October 2005 17:54 > To: Access-UK > Subject: [access-uk] Couple of NOD32 Difficulties > > Hi everyone, > > Two things I can't figure out how to do in NOD32. I can't seem to be able > to > open any of the log files the program creates. I can get to the log files > list and read it but no matter what I do I can't open any of them and read > it. The other issue is similar to the first one but with the "NOD32 System > Tools", particularly with the "NOD32 System Setup" dialog box. I've never > managed to change any of the "NOD32 System Setup" items settings. I can > read > their status whether it's on or off but don't know how to toggle it. Hope > I'm making sense. > > Any advice would be very much appreciated. > > AmroB > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > > > ** To leave the list, click on the immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** access-uk-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq > > ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq