Thanks a lot for your help Steve and Simon. You're right Steve, I used the
Alt S keystroke you suggested and it's a matter of clearing a tick box to
turn the graphical interface off and things are working better now. I didn't
know about this Alt S keystroke, very useful!
Cheers once again.
Hi Amro,
I believe you can even turn off the graphical interface in setup. You don't
have to reinstall again. It is somewhere in tools, if you hit Control-Tab
there, I think you will find it. If not, let me know, and I'll check more
thoroughly, as Mike Lawler of GW told me how to turn off graphics after
installation, so I have a note of it.
All the best -- Computer Room Services: the long cane for blind computer users. Telephone Voice: +44(0)1438 742286, Fax/BBS: +44(0)1438 759589 mobile: +44(0)7956 334938, Email: Steve@xxxxxxxxxxxxxx Web site: http://www.comproom.co.uk
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Amro Bilal
Sent: 24 October 2005 14:02
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: Couple of NOD32 Difficulties
Thanks Steve. I'll give that ago when I get home though I think Simon cracked it. Please see my other message; you might have something more to contribute.
Cheers,
AmroB ----- Original Message ----- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Monday, October 24, 2005 8:34 AM Subject: [access-uk] Re: Couple of NOD32 Difficulties
Hi Amro,
To read the log, open it with right arrow, and then press control-tab.
The other issue of changing the status of an item in Tools is easy too.
Just arrow to it, press control tab to see its status, then press Alt-S to
get you into that utility's setup.
All the best -- Computer Room Services: the long cane for blind computer users. Telephone Voice: +44(0)1438 742286, Fax/BBS: +44(0)1438 759589 mobile: +44(0)7956 334938, Email: Steve@xxxxxxxxxxxxxx Web site: http://www.comproom.co.uk
-----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Amro Bilal Sent: 23 October 2005 17:54 To: Access-UK Subject: [access-uk] Couple of NOD32 Difficulties
Hi everyone,
Two things I can't figure out how to do in NOD32. I can't seem to be able
to
open any of the log files the program creates. I can get to the log files
list and read it but no matter what I do I can't open any of them and read
it. The other issue is similar to the first one but with the "NOD32 System
Tools", particularly with the "NOD32 System Setup" dialog box. I've never
managed to change any of the "NOD32 System Setup" items settings. I can
read
their status whether it's on or off but don't know how to toggle it. Hope
I'm making sense.
Any advice would be very much appreciated.
AmroB ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
