Yeah,It's the password that somehow has got wonkey and, yes, I did take a backup of the firmware once we'd set everything up so I'll give it a go. I'm waiting till the next time it needs sorting (because the wireless seems to go out quite a bit lately) and then I'll go for it.
Thanks! -- Carol carol.pearson29@xxxxxxxxxxxxxx Dj Paddy wrote:
Carol, You need to hold the paper clip or other poker in for 30 seconds to ensure a reset. If by the cfg you mean you had previously taken a backup of the firmware before things (I'm presuming), went wonky. Then yes, you can restore this after resetting the firmware. In fact have you tryed restoring it over the current firmware state, or do you have specific requirements as to why the firmware needs to be reset first? IE. Can't get into the config? The default password of adminw ill work once the firmware has been reset. Dj Paddy ----- Original Message ----- From: "Carol Pearson" <carol.pearson29@xxxxxxxxxxxxxx> To: <access-uk@xxxxxxxxxxxxx> Sent: Tuesday, October 07, 2008 11:58 AM Subject: [access-uk] Re: CAN'T REMEMBER ... CAN'T FIND IT!Well, I've got the .cfg file. Will that set absolutely everything back, do you know? -- Carol carol.pearson29@xxxxxxxxxxxxxx Steve Nutt wrote:Hi Carol, Procedure is a straightened paper clip in that hole, and that's it. That will reset everything and I mean everything back to defaults. So you'll have to set up your secure wireless again, with a WEP key if you use one, or whatever your settings are. All the best Steve -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Carol Pearson Sent: Monday 6 October 2008 21:15 To: access-uk@xxxxxxxxxxxxx Subject: [access-uk] Re: CAN'T REMEMBER ... CAN'T FIND IT! OK, so what's the procedure to make sure it resets and do you think I'll get in with the default password then? If not, what do I do next??? <Grrr!> Steve Nutt wrote:Hi Carol, It is a little hole just near the power outlet. All the best Steve -----Original Message----- From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of Carol Pearson Sent: Monday 6 October 2008 14:25 To: Access UK Mailing List Subject: [access-uk] CAN'T REMEMBER ... CAN'T FIND IT! Hi, Can anyone remind me where the Reset button is on the Linksys WRT300N, please? I don't just want to unplug the mains as my password is corrupt and I can't get into the settings. I'm hoping that a reset may get me there ... Thanks for any help with this.** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq __________ NOD32 3500 (20081007) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** access-uk-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
