[access-uk] Re: CAN'T REMEMBER ... CAN'T FIND IT!
- From: "Steve Nutt" <steve@xxxxxxxxxxxxxx>
- To: <access-uk@xxxxxxxxxxxxx>
- Date: Mon, 6 Oct 2008 22:10:51 +0100
Hi Carol,
Procedure is a straightened paper clip in that hole, and that's it. That
will reset everything and I mean everything back to defaults. So you'll
have to set up your secure wireless again, with a WEP key if you use one, or
whatever your settings are.
All the best
Steve
-----Original Message-----
From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On Behalf Of
Carol Pearson
Sent: Monday 6 October 2008 21:15
To: access-uk@xxxxxxxxxxxxx
Subject: [access-uk] Re: CAN'T REMEMBER ... CAN'T FIND IT!
OK, so what's the procedure to make sure it resets and do you think I'll get
in with the default password then?
If not, what do I do next??? <Grrr!>
--
Carol
carol.pearson29@xxxxxxxxxxxxxx
Steve Nutt wrote:
> Hi Carol,
>
> It is a little hole just near the power outlet.
>
> All the best
>
> Steve
>
> -----Original Message-----
> From: access-uk@xxxxxxxxxxxxx [mailto:access-uk@xxxxxxxxxxxxx] On
> Behalf Of Carol Pearson
> Sent: Monday 6 October 2008 14:25
> To: Access UK Mailing List
> Subject: [access-uk] CAN'T REMEMBER ... CAN'T FIND IT!
>
> Hi,
>
> Can anyone remind me where the Reset button is on the Linksys WRT300N,
> please? I don't just want to unplug the mains as my password is
> corrupt and
>
> I can't get into the settings. I'm hoping that a reset may get me
> there ...
>
> Thanks for any help with this.
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** access-uk-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:access-uk-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** access-uk-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
