[1stPickPCHelp] Re: David Pritchard's Netgear ME102 AP - Software
- From: Kevin McGuire <kevinmcguire@xxxxxxx>
- To: 1stpickpchelp@xxxxxxxxxxxxx
- Date: Tue, 06 May 2003 21:54:40 -0400
Today I had 2 ME102s that I had to configure from Netgear. I had 2
different disks, one with 1.3, the other with 2.0. I installed the 1.3,
and configured one ME102 successfully. I then tried to configure the
second ME102 with 1.3, but it came up with "The DFU driver has not been
loaded yet" error message.
What ultimately worked? First, removing the 1.3 software. I did it once
with the Add/Remove programs; another time, I did it with the uninstall
utility that the install created. Second, and just as important, putting
the 2nd ME102 on a totally separate USB bus. My PC has 2 USB ports in
front, and 2 in the rear. The two groups are on 2 separate busses. As
soon as I plugged the second ME102 into the rear USB group, instead of the
front one where I configured the first ME102, it was discovered correctly
by the PC and I could run the USB Manager utility to configure it.
Kevin McGuire
Integrity Computer Consultants
www.integritycomputerconsultants.com
781-559-8118 business line
~*~*~*~*~
Was this forwarded to you? Want to subscribe? Send an email
to 1stpickpchelp-request@xxxxxxxxxxxxx?Subject=subscribe.
For a complete list of email commands for our list send an email
to ecartis@xxxxxxxxxxxxx with a subject of "info 1stpickpchelp" without the quotes.
If you wish to unsubscribe from our list send an email
to 1stpickpchelp-request@xxxxxxxxxxxxx?Subject=unsubscribe
To contact the list moderators send an email to
1stpickpchelp-moderators@xxxxxxxxxxxxx
~*~*~*~*~
Other related posts:
