[windows2000] Re: Question about Boot.ini modification
- From: "Allen, Christine" <Christine.Allen@xxxxxxxxxxxxxxxxxxxxx>
- To: "'windows2000@xxxxxxxxxxxxx'" <windows2000@xxxxxxxxxxxxx>
- Date: Thu, 3 May 2007 08:18:22 -0400
Thank you.
_____
From: windows2000-bounce@xxxxxxxxxxxxx
[mailto:windows2000-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Semon
Sent: Thursday, May 03, 2007 8:13 AM
To: windows2000@xxxxxxxxxxxxx
Subject: [windows2000] Re: Question about Boot.ini modification
Try this. I have this on our Exchange Server
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Standard"
/noexecute=optout /fastdetect /3gb /userva=3030
Mike
_____
From: windows2000-bounce@xxxxxxxxxxxxx
[mailto:windows2000-bounce@xxxxxxxxxxxxx] On Behalf Of Allen, Christine
Sent: Thursday, May 03, 2007 6:25 AM
To: 'windows2000@xxxxxxxxxxxxx'
Subject: [windows2000] Question about Boot.ini modification
I ran my Exchange best practice analyzer and it complained that I needed to
add to the 3/GB switch on two of my 2003 domain controllers. I did, but
when I ran it again after I rebooted them, it did not notice the change.
They read as follows:
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows Server 2003, Standard"
/fastdetect /3GB /NoExecute=OptOut
My only guess is that I did not put the switch in the right place. Should I
have put it after the "/NoExecute=OptOut"? My last environment was a 2000
AD environment and did not have the /"NoExecute=OptOut"?
Any help would be appreciated.
Christine Allen
Systems Engineer
Electric Insurance Company
75 Sam Fonzo Drive
Beverly, MA 01915
phone: 978-524-5612
fax: 978.236.5612
christine.allen@xxxxxxxxxxxxxxxxxxxxx
http://www.electricinsurance.com <http://www.electricinsurance.com/>
Other related posts:
