Steve,
Don't worry, this message was sent way before my Roger demo.
Cheers,
JPR
http://www.jprykiel.com
http://soundcloud.com/ryksounet
http://twitter.com/ryksounet
http://facebook.com/jeanphilipperykiel
Le 24/02/2017 à 16:38, Steve Matzura a écrit :
JP, this sounds exactly like what you showed us on the Samplitude
Roger group yesterday.
On Wed, 22 Feb 2017 10:28:30 +0100, you wrote:
hi there,--
you can insert effects on objects in Samplitude, it's easy enough thanks
to Steve. Now, here is a little paragraph in Samplitude's manual that
interests me.
quote :
Object effects
Gain and AUX sends
*Gain:* Set the gain for the object here.
*AUX Sends: *Any object can send to all available AUX busses. You will
see, however, initially only to AUX1 AUX 4. You can adjust the
corresponding slider by dragging in the respective AUX Send field.
By right click on the blue button in the header the advanced AUX send
dialog will open, which provides full access to all AUX send paths.
By left clicking on the blue button in the track header you can bypass
all AUX sends (Bypass function).
end of quote.
I can see the gain in the object editor's effects tab but not the Aux
sands. Can you fix this Steve?
Best,
JPR
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
