You sure are right about all that!
On Sun, 26 Mar 2017 23:16:03 +0300, you wrote:
I don't know, but in my life always! I am starting somethink for dificult--
thinks, but there are fine, when you learn many thinks in one time. If you are
starting from simply thinks, you are doing every think much slower, and always
are thinking"i am not ready to learn this is to dificult, i will figur out
later"
Sent from my iPhone
On 26 Mar 2017, at 19:36, Steve Matzura <number6@xxxxxxxxxxxxxx> wrote:
Egl, wow, nothing like starting with an overflowing plate! You're a
very ambitious person. And you figured out how to do it!
On Sat, 25 Mar 2017 13:33:49 +0200, you wrote:--
Yes! It's work, so there need select eatch track! but fine! Thank you
Steve! You made my life :)
I just finish mixing Opera yesturday. I don't know wy, but in my life i
allways start to learn somethink from quite dificult thinks :D this time as
well. I started use Samplitude from 44 unnamed chanell opera :D there was a
lot of automations and 14 vocalists with lavalier Microphones, whitch
always need controll and on only when they are singing. So Now for me is
more confortable do these thinks when on Sonar.
Thank you again for these scripts and help!
Sent from my iPhone
On 25 Mar 2017, at 12:50, Steve Spamer <stevespamer68@xxxxxxxxx> wrote:
Hi, I havent tried multiple routing at once, but if its possible you
need to be in zoom mode with the tracks you want to select showing. Then,
hold the control key down and up/down arrow to the first track, press
enter( again while the control key is down), then move to the last track
and repeat...this should select all tracks inbetween. Then route the
track and see if it works. Steve.
From: egl? jarmolavi?i?t?
Sent: Friday, March 24, 2017 12:01 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Request for some suggestions
Yes, i know this, but if i have 10 or 15 tracks, whitch i would like set
to one submix bus? i must press on eatch track alt m or alt s and set.
maybe is there way do this faster by selecting tracks?
Thank you!
Sent from my iPhone
On 24 Mar 2017, at 13:56, Steve Spamer <stevespamer68@xxxxxxxxx> wrote:
This isnt for sighted people only. I think you need to read the
documentation a little more, as to create a submix track, create it via
the apps key, then select that sub mix track in the alt+s or alt+M twice
menu on each track you want to route there.
Steve.
From: egl? jarmolavi?i?t?
Sent: Friday, March 24, 2017 6:51 AM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Request for some suggestions
yes, i tried split objects, it works.
So what about set one output for several tracks? I listened this podcast
in youtube, but... i think this is more for sighted people.
https://youtu.be/E_U0ObmVtzA ;
i also tried select tracks in zoome mode with control enter, but in this
situation doesn't work as well.
What about ranges, once i finish my current work: mixing opera i will try
take manager and comping.
ger Sent from my iPhone
On 24 Mar 2017, at 00:27, Steve Spamer <stevespamer68@xxxxxxxxx> wrote:
Kevin, unfortunately it doesn't work like that, as F11 and F12 are
applying a kind of selection to the range, but not in a toggle scenario.
You can do that with objects though. A lot of this is very easy
visually, but harder to make accessible when you can't see the screen.
Steve.
-----Original Message----- From: Kevin Gibbs
Sent: Thursday, March 23, 2017 10:08 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Request for some suggestions
Could you press CTRL Windows F11 on one track after having made a
discontinuous track selection? If you had every other track selected
impressed that keystroke wants what it not choose those discontiguous
tracks for the bars in the range?
Sent from my iPhone
--On Mar 23, 2017, at 3:52 PM, Steve Spamer <stevespamer68@xxxxxxxxx>
wrote:
If you draw a range, say from bar to to bar 3, then press control
windows F11, that will select that 1 bar on that 1 track. Pressing F12
instead of F11 will select that 1 bar over all tracks. Deleting,
cutting, copying etc will then be available to you. Steve.
-----Original Message----- From: egl? jarmolavi?i?t?
Sent: Thursday, March 23, 2017 3:34 PM
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Re: Request for some suggestions
Yes, i folowed instructions how to select tracks, but with ranges it
doesn't work, with setting one output for selected tracks as well.
For selecting several audio i tried split objects.
Sent from my iPhone
--On 23 Mar 2017, at 15:28, Phil Muir
<info@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
JPR is right. This can be done and it may be that you need to do this
in
Jaws zoom mode. E.G. select multiple tracks etc.
-----Original Message-----
From: vipaudioaccess-bounce@xxxxxxxxxxxxx
[mailto:vipaudioaccess-bounce@xxxxxxxxxxxxx] On Behalf Of egle
jarmolaviciute
Sent: 23 March 2017 07:01
To: vipaudioaccess@xxxxxxxxxxxxx
Subject: [vipaudioaccess] Request for some suggestions
Hello, for everybody
few weeks before i am started to use Samplitude. Now i can not say, i
am
hapy to use this product, there are some dificulties. Before i used
Sonar,
so here is a lot of differences.
So most dificulties are with multiple selections: one output set for
some
tracks, send to aux bus some tracks. Set range not for all tracks, but
for
part traks of my project.
Usually i am working with over 20 chanell audio projeckts, so these
multiple
selections would safe my time :)
maybe somebody could help me resolve?
And do not understand tracks selection feature, because i can do
nothing of
selected tracks. for example set range and cut copy part of objects
and ETC.
And finally i would like to thank for great podcasts in youtube.--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx with 'subscribe' in the Subject
field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject
field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
--
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx with 'subscribe' in the Subject
field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject
field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;
- To post to the mailing list, simply send email to
vipaudioaccess@xxxxxxxxxxxxx.
- To subscribe to the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'subscribe' in the Subject field.
- To unsubscribe from the list, send an email to
vipaudioaccess-request@xxxxxxxxxxxxx
with 'unsubscribe' in the Subject field.
- For more list options, like setting digest and vacation modes, visit
//www.freelists.org/list/vipaudioaccess ;
- Online, searchable archives of the list are available at
//www.freelists.org/archive/vipaudioaccess ;