Dear all, and especially Bernd, Femke and Emmanuel,
Based on the currently uploaded course modules, we have the following hour load
distribution:
M1: 19,5 online content + 4 practical work + 1 bullet point
= 24.5 hours
M2: 24 online content + 1 bullet
point = 25 hours
M3: 12 online content
= 12 hours
M4: 11 online content
= 11 hours
M5: 44 online content + 16 practical work
= 60 hours
total 132.5 hours, including 20 hours practical work + 2 hours for the bullet
points.
Apparently, no group work is now included in the module 5. And no practical
work is now considered in module 3 and 4 although assignments are actually
included in the modules (e.g. 3.2.1.).
HOWEVER:
For the course we have committed for having
150 hours of total course
80 hours at presence (module 5 + portions of other modules) + 70 hours at
distance
ACCORDINGLY
I’m here to ask you to proceed with the following redistribution:
M1: 20 online content + 4 practical work + 1 bullet point
= 25 hours
M2: 24 online content + 1 bullet
point = 25 hours
M3: 12 online content + 3 practical work
= 15 hours
M4: 11 online content + 4 practical work
= 15 hours
M5: 44 online content + 16 practical work +10 Group work
= 70 hours
Total 150 hours, including 80 hours at presence (70 from M5 + 2.5 hours from
each of the other modules) + 70 hours distance learning (M1, M2, M3, M4 each
reduced by 2.5 hours).
If we agree on this distribution WE DO NOT HAVE TO CHANGE ANYTHING ON THE
MODULES CURRENTLY ONLINE. WE ONLY NEED TO ADD A “GROUPWORK” TASK (10 hours).
The course can then be included in the study plan of partner universities for
ECTS recognition, enabling students to receive 5 to 6 ECTS (according to the
value of ECTS in the partner university if 1 ECTS is equivalent to 30 or 25
hours).
Please confirm that this decision is fine to you not later than Thursday 23rd
so we can proceed preparing the presentation for the multiplier event in NL.
Best
Francesco
