Thanks. I don't know about the connection under the 8032 board. I will
check. It out.
Jerry
Sent from my iPad
On Apr 1, 2015, at 2:42 PM, Steve Gray <sjgray@xxxxxxxxxx> wrote:
Ok, do you have all the parts?
- two boards (cpu and memory)
- two ribbon cables
- power extender cable
- One or two switches: 6502/prog/6809 and maybe U11/U2 something (forget
exactly)
Connections:
- short ribbon cable connects the two boards together
- longer ribbon cable connects to 8032 board's CPU socket and SuperPET cpu
board
- power extender goes from SuperPET CPU board to 8032 board.CPU transplanted
onto SuperPET board.
-original power cable plugs into SuperPET CPU board
- switch(es) go to SuperPET CPU board
Check:
- Is there a small board in the slot on the memory board?
- Does your 8032 board have the wire on the bottom running from the 16MHz
signal to the cpu socket?
- Does your 8032 board have a 4K character generator rom?
Steve
From: Jerome Coggins <jeromecoggins@xxxxxxxxxxx>
To: torontocbm <torontocbm@xxxxxxxxxxxxx>
Sent: Wednesday, April 1, 2015 2:20 PM
Subject: [torontocbm] Upgrade to Superpet
Hi. I have a PET 8032 and have a two-board Superpet upgrade kit. Can anyone
provide me with instructions and/or insights on doing this. At first
connection i have gotten nothing to work after installation.
Regards.
Jerry
Sent from my iPad