[THIN] Re: thinprint for 64bit Citrix to 32bit PrintServer
- From: "Anthony Green" <agreen@xxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Tue, 9 Dec 2008 21:36:42 -0000
These are a mishmash of network printers (session based assigned via citrix
policies) so can't use the UPD.
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Joe Shonk
Sent: 09 December 2008 15:20
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Re: thinprint for 64bit Citrix to 32bit PrintServer
Why not just use the UPD included with Citrix? For most organizations it
works great. Very, very few cases where a third-party solution is required.
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf
Of Anthony Green
Sent: Tuesday, December 09, 2008 5:13 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] thinprint for 64bit Citrix to 32bit PrintServer
We are upgrading a Citrix farm to 64bit and was looking at this as a
possible solution to the print problems we would get with 64bit drivers (or
lack of them).
We are not going to be using thinprint for client printing... just for
network printing.
I've been told we need to buy .print engine for all CTX servers and the
.print client would be installed on the print server.
Does this sound right? Anyone give me a rough idea of cost for this per
Citrix Server (approx 60) or per user?
Thanks,
Ant.
Other related posts:
