i'm not sure about metaframe 1.8 but on XPe it's no problem to map client printer drivers to citrix's universal print driver. You can be sure that the universal print driver will not crash your servers. the drawback is that the universal print driver will not have as many settings as the normal driver (no colour, no duplexing, etc). If you cant do it in 1.8 then I'd recommend testing the NT4 print drivers first. Most drivers will be fine. HP had a list of compatible drivers. Someone posted the URL to this list recently. Take a look through the archives for that post. Hope this helps, gray -----Original Message----- From: GATEAU Nicolas [mailto:nicolas.gateau@xxxxxxxxxx] Sent: July 5, 2002 9:52 AM To: 'thin2' Subject: [THIN] printing question I have a W2K print server and 22 W2K Citrix Metaframe 1.8 SP3 server. All W2K servers are in a NT4 domain A . Clients computer are in several NT4 domain with relationships with domain A. For printing, i want to declare print queues on the W2K server print server share printers and add NT4 drivers for clients computers. With NT4, clients use NT4 drivers of w2K print server and when they connect on MF 1.8, ICA protocol is configured to remap printers of the client. So in ICA session, they have the sames printers... Is it dangerous to have multiple OS print drivers on the W2K print server ?? I have read that the print server can crash with BSOD if there are suspect drivers on the print server with ICA or TS using. Note that the print server have not MF installed. If somebody have experience, thanks... Nicolas =================================== For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link. http://thethin.net/citrixlist.cfm