[THIN] One-Hop Secure Gateway implementation
- From: kevin.mcphail@xxxxxxxxxxx
- To: thin@xxxxxxxxxxxxx
- Date: Thu, 7 Oct 2004 16:07:13 -0400
Hi guys, I finally got around to upgrading to Secure Gateway 2.0 and WI 3.0.
After following the Citrix document of assigning 2 ip addresses to the
server and setting disablesocketpooling = true; then troubleshooting why
that did not work and finding that IIS 6.0 does not use that Boolean and
instead has a support tool for setting IIS to listen to only one address;
then realizing that the Citrix document is outdated and no longer necessary,
then trying to figure out how to undo everything I did, I finally got Secure
Gateway and WI working on the same box and connections work great.
Unfortuantely the Secure Gateway MMC does not seem to work correctly.
Hopefully this is not because of one of the changes I made. Anyway when I
look at http/s or ICA connections in the MMC the list is always empty. If I
look at sh conn on the firewall I can see that the users are establishing
connections to Citrix through the gateway just fine but for some reason the
MMC tool is not registering this. Anyone have any suggestions? One of the
things I was most excited about was the ability to easily see who is
connected through the gateway and it is broken. :-(
Other related posts:
