There is not a way to do this with MFXP but with MFPS3 you can setup zone failover. Jeff Pitsch Senior Network Engineer - Citrix, U.S. -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Henske, Jennifer Sent: Tuesday, September 07, 2004 5:21 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Limiting users to a zone Using XP FR3 windows 2003 with WI. I need to set up some users that will have a citrix box in their branch office. They are connected with a T1. I want them to use their box 100% of the time unless that box has a failure, then they should come back to the HQ zone. Can I do this automatically? I know I could publish another set of apps with the HQ boxes, but I don't want to do that if possible. Any ideas? Thanks! Jennifer Henske Project Engineering A.G. Edwards Technology Group ------------------------------------------------------------------------ ------------- A.G. Edwards & Sons' outgoing and incoming e-mails are electronically archived and subject to review and/or disclosure to someone other than the recipient. ------------------------------------------------------------------------ ------------- ******************************************************** This Weeks Sponsor triCerat: Have you had your fill of printing support calls, unauthorized apps running on unsecured Terminal Servers, profile headaches, and application performance problems? Join us and learn how you can have a less demanding on-demand enterprise! http://www.tricerat.com/?page=events#register ********************************************************** Useful Thin Client Computing Links are available at: http://thin.net/links.cfm *********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thin.net/citrixlist.cfm