Be careful with the "Small delay in displaying licenses"... It quite = scared me the first time I saw the incomplete licenses error... I thought my = IMA database was corrupt... Well, that teaches you to read the README.TXT Carlos Sanabria, MCSA, CCA IT Consultant =20 -----Original Message----- From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On = Behalf Of John Twilley Sent: Wednesday, May 28, 2003 2:25 PM To: 'thin@xxxxxxxxxxxxx' It went smooth as silk....=20 I'm sure none of the Metaframe Admins here would install this on a production server without testing it first! Right?=20 -----Original Message----- From: Minero Hector B DLVA [mailto:MineroHB@xxxxxxxxxxxxx] Sent: Wednesday, May 28, 2003 3:03 PM To: 'thin@xxxxxxxxxxxxx' It makes me not want to install it!! _________________________________ Hector Minero NSWCDD Code K55 Ph: (540)653-8859 Fax:(540)653-8575 -----Original Message----- From: Anderson, Frank [mailto:Frank.Anderson@xxxxxxxxxx] Sent: Wednesday, May 28, 2003 2:53 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] FR3 - know issues Known issues with FR3 on Windows 2000 and 2003: =3D20 Changes to a MetaFrame XP server's product code do not take effect =3D instantaneously.=3D20 When you change a MetaFrame XP server's product code, the change does = =3D not take effect until a polling interval passes. When the polling =3D = interval is passed, the server attempts to take a new license based on =3D the new = product code. The original product code is displayed in the =3D Management = Console for MetaFrame XP during the polling interval. =3D [#56603]=3D20 Small delay in displaying licenses=3D20 When you add, activate, or delete licenses in the Management Console, = =3D you can experience a delay of a minute before the updated license =3D = information is displayed in the Management Console and the licenses are =3D = available to the farm. If you try to refresh the licensing information =3D in less = than a minute you may see a message that the license list is =3D incomplete. [#56674]=3D20 ica32_all.msi is not supported for independent installation=3D20 A new file, ica32_all.msi, is used during the regular installation of = =3D MetaFrame XP on a server. Using ica32_all.msi for independent =3D = installation of the ICA Client outside of the MetaFrame XP installation =3D is not supported. [#55827]=3D20 =3D20 IMA Service can fail to start when using IPSEC The Citrix IMA Service can fail to start when IP Security (IPSEC) is =3D required in communications between MetaFrame XP servers and the server = =3D hosting the MetaFrame XP server farm's data store. When the MetaFrame XP = =3D server is restarted, the IMA Service must wait for the Microsoft IPSEC = =3D services to start. You can fix this problem by manually adding =3D = PolicyAgent to the IMAService dependencies list. Add the string =3D "PolicyAgent" to = the registry value DependOnService under =3D HKLM\SYSTEM\CurrentControlSet\Services\IMAService. [#54405]=3D20 =3D20 MetaFrame 1.8 installation using the Program Neighborhood Agent=3D20 If you want to use the Program Neighborhood Agent as the pass-through = =3D client on the MetaFrame XP Server and you are upgrading from MetaFrame = =3D 1.8, you must install both the full Program Neighborhood Client and the = =3D Program Neighborhood Agent when you run MetaFrame Setup. Installing =3D Program Neighborhood updates earlier versions of the Program =3D = Neighborhood Client. Not updating the client can cause problems. If you =3D want to = install only the Program Neighborhood Agent pass-through client, =3D remove = Program Neighborhood using Add/Remove Programs for MetaFrame XP =3D Server with Feature Release 3. Select the Modify option in the =3D installation = wizard to remove components. [#58844]=3D20 =3D20 Close the Management Console before running CHFARM=3D20 Be sure that the Management Console for MetaFrame XP is closed before = =3D you run the chfarm command. Running chfarm while the console is open can =3D result in loss of data and functionality. [#42269]=3D20 =3D20 Multiple servers can be set to be most preferred data collectors=3D20 When installing servers into a new zone, multiple servers can be =3D automatically set to be most preferred data collectors. [#57146]=3D20 Avoid a forward slash (/) in Active Directory Service account names when = =3D using MFCOM=3D20 The MFCOM service incorrectly interprets an Active Directory Service =3D = user name that contains forward slashes. The "/" in an account name =3D = string is interpreted as a folder delimiter. For example, account name =3D "account/01_A" is interpreted as two separate entities, the string =3D "account" is interpreted as a MFCOM folder, and "01_A" is treated as a = =3D user name. The most common exception caused is "the parameter is =3D incorrect" but other exceptions can also occur. Either do not use MFCOM = =3D to access Active Directory Service account names that contain a "/" or =3D = avoid using a "/" in the account names. [#56361]=3D20 Setting CTX_MF_ENABLE_VIRTUAL_SCRIPTS for a silent installation=3D20 Running a silent installation of MetaFrame XP without setting the =3D MetaFrame XP Setup property CTX_MF_ENABLE_VIRTUAL_SCRIPTS to "Yes" or 1" = =3D can cause Setup to abort. A "Yes" or "1" setting prevents a prompt for = =3D creating a virtual scripts directory during silent installation. For =3D = more information on customizing MetaFrame XP Setup, see the MetaFrame XP =3D = Server Administrator's Guide. CTX_MF_ENABLE_VIRTUAL_SCRIPTS is used when =3D = the XML port on the MetaFrame XP server is shared with Internet =3D Information Services (IIS) and one of the following is true: * The =3D server is = running Windows Server 2003 with IIS installed * The server is =3D running = Windows 2000 Server with IIS installed and the IIS Lockdown Tool =3D applied [#62080]=3D20 Input from Extended UNICODE Keyboard Support-enabled clients fails in = =3D four cases When you use Windows XP Tablet PC Edition Service Pack 1 with Speech to = =3D Text or handwriting recognition invoked (utilizing the writing pad): * = =3D If the ICA published application or desktop is configured for the =3D = floating bubble option in SpeedsScreen Latency Reduction, the floating =3D bubble = will not display text written from within the writing pad panel. =3D [#59204] = * Text cannot be entered into a shadowed ICA session. [#59424] =3D * Text cannot be entered into the Windows Logon dialog box for an ICA = =3D session. [#59425] * Text cannot be entered into an embedded Web session. = =3D [#60599]=3D20 Text entered using the keyboard panel is handled correctly. =3D20 Known issue with FR3 on Windows 2000: Downgrading to Feature Release 2 resets the XML port=3D20 The XML port is reset to port 80 when you downgrade from MetaFrame XP = =3D Server Feature Release 3 to Feature Release 2 on a server on which =3D Internet Information Services (IIS) is not installed. [#58002]=3D20 Uninstalled servers continue to be displayed in the Management = Console=3D20 When you uninstall MetaFrame XP from several servers, the servers that = =3D are no longer in the MetaFrame XP farm may continue to be displayed in =3D = the Management Console (in the Zones pane of the farm's Properties =3D = page). Uninstall MetaFrame XP from only ten servers at a time to avoid =3D this issue. [#58288]=3D20 Known issue with FR3 on Windows 2003: Published application limits=3D20 Changes that you make to the application instance limits setting for a = =3D published application are effective only for ICA connections established = =3D after you change the setting. This means that if users disconnect before = =3D or after you change the setting, they can always reconnect to the =3D disconnected session. You can either kill disconnected sessions or =3D = restart the machines in the farm after you change the setting for it to =3D be = totally effective.=3D20 MetaFrame XP server farm-wide logon limits=3D20 Changes that you make to the server farm-wide logon limits affect only = =3D ICA connections established after you change the setting. This means =3D = that if users disconnect before or after you change the setting, they =3D can = always reconnect to the disconnected session. You can either kill =3D = disconnected sessions or restart the machines in the farm after you =3D change the = setting for it to be totally effective.=3D20 User access to published applications=3D20 Changes that you make to the users or user groups who have access to a = =3D published application affect only ICA connections established after you = =3D change the setting. This means that if users disconnect before or after = =3D you change the setting, they can always reconnect to the disconnected = =3D session. You can either kill disconnected sessions or restart the =3D = machines in the farm after you change the setting for it to be totally =3D = effective. You are likely to see this issue if you move users from group =3D to = group or if you completely remove groups from the list of those =3D having access = to the application.=3D20 Audio as a minimum requirement=3D20 Audio as a minimum requirement cannot be enforced on Windows Server 2003 = =3D when users are reconnecting to disconnected sessions. This limitation = =3D will be fixed in a future release of Windows Server 2003.=3D20 Issues using smart cards on Windows Server 2003=3D20 Contact your smart card vendor for specific smart card software that is = =3D validated by the vendor for use with Windows Server 2003. Citrix =3D recommends that you contact your smart card vendor for advice and =3D = support before deploying MetaFrame XP running on Windows Server 2003 =3D with = your smart card system.=3D20 The minimum encryption level set in a MetaFrame XP policy is not =3D enforced=3D20 The minimum encryption level, set in a MetaFrame XP policy using the =3D Management Console, is ignored when Citrix ICA Clients connect to a =3D = server running Windows Server 2003. Citrix will be working with =3D Microsoft = to resolve this issue. You can use Microsoft Terminal Server =3D Group = Policies to enforce minimum encryption level on a Windows Server =3D 2003 server. See "ICA session encryption level can be controlled with = =3D Microsoft Group Policies" later in this readme. [#62013]=3D20 ICA session encryption level can be controlled with Microsoft Group =3D Policies=3D20 You can use the Microsoft Terminal Services Group Policy option, Set =3D client connection encryption level, to set the minimum encryption level = =3D for an ICA Session. There are three encryption levels: High Level (128 = =3D bit), Low Level, and Client Compatible. When High Level is used, ICA =3D Clients must be configured for 128 bit encryption to access the =3D = MetaFrame XP server. When Low Level is used, data is encrypted at the =3D maximum = level supported by the ICA Client. A client can be configured at =3D any ICA encryption level to access the server including Basic. When =3D Client Compatible is used Basic is excluded, otherwise data is encrypted =3D at = the maximum level supported by the ICA Client. [#28454]=3D20 Limiting connections for anonymous users may be enforced erratically in = =3D one case=3D20 When you set the registry key =3D HKLM\SYSTEM\CurrentControlSet\Control\Citrix\MaxAnonymousUsers to limit = =3D connections for anonymous users and the Terminal Services Configuration = =3D setting Restrict each user to one session to Yes, the result is erratic = =3D enforcement of the limit. Sometimes the connection limit is exceeded =3D without errors and sometimes fewer connections are permitted than the = =3D allowed limit. If you want to use the MaxAnonymousUsers registry key to = =3D limit the number of anonymous user connections, ensure that Restrict =3D = each user to one session is set to No. [#56127]=3D20 Installation of Citrix Web Console on a non-MetaFrame XP server=3D20 To install the Citrix Web Console on a server that is running Windows = =3D Server 2003 but is not running MetaFrame XP, you must turn on Active =3D Server Pages scripting support in Internet Information Services. Follow = =3D these steps: Start the Internet Information Services Manager from within = =3D Administrative Tools. Click the local computer. Double-click Web Service = =3D Extensions. In the right pane, right-click Active Server Pages and =3D = select Allowed. [#60081]=3D20 Client time zone settings no longer override Windows group policy =3D settings=3D20 Help in the Management Console for MetaFrame XP states that client time = =3D zone settings override similar settings configured in Microsoft Windows = =3D Group Policies. This statement is not true for MetaFrame XP servers =3D running Windows Server 2003. On a server running Windows Server 2003, = =3D the Microsoft Terminal Services Group Policy option, "Allow time zone =3D redirection", overrides the Management Console setting, "Use local time = =3D of ICA Clients". An ICA session on a client connected to that type of =3D = server reflects the server's time zone when "Allow time zone =3D redirection" = is disabled. The setting "Use local time of ICA Clients" is =3D ignored. [#62388]=3D20 Internet Explorer Enhanced Security Configuration can restrict Internet = =3D browsing Users can be restricted in browsing the internet from an ICA session if = =3D the Internet Explorer Enhanced Security Configuration is enabled. This = =3D feature is enabled by default when Windows Server 2003 is installed. To = =3D allow users to browse the Internet easily follow these steps: 1. Open = =3D Add or Remove Programs in the Control Panel. 2. Click Add/Remove Windows =3D Components. 3. Click Internet Explorer Enhanced Security Configuration = =3D and click Details. 4. Make sure the setting "For all other user groups" =3D = is not selected. Click OK. For security, you may want to leave Internet =3D = browsing restricted for the administrator group. [#62591]=3D20 Anonymous users must be in the Remote Desktop Users group in order to = =3D connect=3D20 To allow anonymous users to connect to a MetaFrame XP server, add the = =3D anonymous user accounts to the Remote Desktop Users group. Anonymous =3D = user accounts are created during MetaFrame XP installation. To =3D administer = group access choose Start > Administrative Tools > Computer =3D Management > = Local Groups and Users > Groups. [#62483]=3D20 After installing MSDE start the MSDE service prior to installing =3D = MetaFrame XP=3D20 When you install an instance of Microsoft SQL Server 2000 Desktop Engine = =3D (MSDE) for use as a data store, start the MSDE service by restarting the = =3D server prior to installing MetaFrame XP. The MSDE Service should be =3D running when MetaFrame XP accesses the data store during installation. = =3D For more information about installing MSDE from the MetaFrame XP Server =3D = CD, see the MetaFrame XP Server Administrator's Guide. [#62944]=3D20 =3D20 Citrix WMI Provider for MetaFrame XP=3D20 Using the WMI Provider with servers running Windows Server 2003=3D20 Citrix recommends that you do not use a WMI consumer (for example, =3D Microsoft MOM) to manage a server running Windows Server 2003 if you =3D = have more than 10 servers in your server farm.=3D20 =3D20 =3D20 =3D20 ******************************************************** This Week's Sponsor - Appsense Technologies New! AppSense Optimizer is a = new product from AppSense designed to increase the user capacity of your servers.=20 http://www.appsense.com/ ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode = use the below link: http://thethin.net/citrixlist.cfm ******************************************************** This Week's Sponsor - Appsense Technologies New! AppSense Optimizer is a = new product from AppSense designed to increase the user capacity of your servers.=20 http://www.appsense.com/ ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode = use the below link: http://thethin.net/citrixlist.cfm ******************************************************** This Week's Sponsor - Appsense Technologies New! AppSense Optimizer is a = new product from AppSense designed to increase the user capacity of your servers.=20 http://www.appsense.com/ ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode = use the below link: http://thethin.net/citrixlist.cfm ******************************************************** This Week's Sponsor - Appsense Technologies New! AppSense Optimizer is a new product from AppSense designed to increase the user capacity of your servers. http://www.appsense.com/ ********************************************************** For Archives, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: http://thethin.net/citrixlist.cfm