can you not just try to run the remap drives utility, to change the mappings again. this could be do-able by adding [GuiRunOnce] ;use this line to run a command when the mini install wizard runs Command0 = "path to drive remap utiltiy" again I have not checked this, it is only a suposition. On 07/11/05, Luchette, Jon <JLuchette@xxxxxxxxxxxxxxx> wrote: > What happens is after we capture the sysprepped image on the server that we > have changed the drive letters on, for example C: and D: are now U: and V:, > and we blow it down to the new server, the new server comes up with C: and > D: instead of U: and V: and we get the following error: > > > "The logon user interface dll ctxgina.dll failed to load. " > > > > What is the solution that you are referring to? I will give it a shot... > > > > Thanks! > > > _______________________________________________ > Jon Luchette > Emerson Hospital > Technology Specialist III > Work: 978-287-3369 > Cell: 978-360-1379 > > > jluchette@xxxxxxxxxxxxxxx > _______________________________________________ > > > ________________________________ > From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf > Of Michel Roth > Sent: Monday, November 07, 2005 3:43 AM > > To: thin@xxxxxxxxxxxxx > Subject: [THIN] Re: Cloning with Remapped Drives > > > In what way does it not work? If it's drive letter assignment after the > imaging that's the problem then there's a solution. > > 2005/11/5, Luchette, Jon <JLuchette@xxxxxxxxxxxxxxx>: > > >>>>>>>>>>using sysprep in conjunction with snapclones on our EVA SAN we > can deploy an OS to a blade in about 2 or 3 minutes. Unfortunately, this > second option doesn't seem to work with Citrix and remapped drives. > > > > > > > > ________________________________ > > > > From: thin-bounce@xxxxxxxxxxxxx on behalf of M > > Sent: Fri 11/4/2005 6:02 PM > > To: thin@xxxxxxxxxxxxx > > Subject: [THIN] Re: Cloning with Remapped Drives > > > > > > Crikey ... how are you managing the Blades ? > > RDP is a great way to deploy operating systems and apps to your Blades > along with managing them. > > > > BTW version 2.2 is out and available from the HP RDP website. > > > http://h18013.www1.hp.com/products/servers/management/rdp/rdp-dl.html > > > > Your enclosure licenses will be valid > > > > > > ----- Original Message ----- > > From: Luchette, Jon <mailto:JLuchette@xxxxxxxxxxxxxxx> > > To: thin@xxxxxxxxxxxxx > > Sent: Friday, November 04, 2005 10:45 PM > > Subject: RE: [THIN] Re: Cloning with Remapped Drives > > > > We haven't tried RDP yet, we were trying to use Sysprep when we > encountered the problem. We'll just try RDP then, it sounds like it should > work... > > > > Does anyone know of a way to make sysprep work? Just curious? > > > > Thanks! > > > > ________________________________ > > > > From: thin-bounce@xxxxxxxxxxxxx on behalf of M > > Sent: Fri 11/4/2005 5:09 PM > > To: thin@xxxxxxxxxxxxx > > Subject: [THIN] Re: Cloning with Remapped Drives > > > > > > What issues are you having with RDP and remapped drives ? > > > > RDP has supported cloning with remapped drives since an Altiris DS > patch for 1.5 was released last year. > > > http://h18013.www1.hp.com/products/servers/management/rdp/knowledgebase/00000122.html > > > > > > > > > > ----- Original Message ----- > > From: Luchette, Jon <mailto: JLuchette@xxxxxxxxxxxxxxx> > > To: thin@xxxxxxxxxxxxx > > Sent: Friday, November 04, 2005 8:41 PM > > Subject: [THIN] Cloning with Remapped Drives > > > > Hello, we are running 8 MF XP FR3 servers with sp4. The > Operating System is Windows 2003 server sp1. These are HP blade servers > that currently boot from our SAN. We are trying to develop an effective > cloning strategy but have run into the issue from having remapped drive > letters (U: and V:). I know that this has been discussed on this list in > the past and I thought there was some type of solution that works now, but I > cannot remember for sure what is was. What are people doing to get around > this issue? We have licensing for HP's RDP (rapid deployment pack), but if > you know of other solutions that work, please let me know as well. > > > > Thanks in advance for your replies! > > > > > > > _______________________________________________ > > Jon Luchette > > > > Emerson Hospital > > Technology Specialist III > > > > Work: 978-287-3369 > > Cell: 978-360-1379 > > > > jluchette@xxxxxxxxxxxxxxx > > > _______________________________________________ > > > > > > > > > > > > > > -- Tom at home ************************************************ For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use the below link: //www.freelists.org/list/thin ************************************************