[THIN] Re: Citrix WAN design - the ultimate design
- From: "Evan Mann" <emann@xxxxxxxxxxxxxx>
- To: <thin@xxxxxxxxxxxxx>
- Date: Wed, 16 Jul 2008 09:37:28 -0400
Ditch frame for MPLS. 4mb links sounds overkill for 40 users given the 80%
ICA/20% local apps, but that will also depend on their other internet traffic
and if you default route it through the internet at your head office, or if
your provide lets you do default internet routing out through them and you go
that route.
As a bandwidth reference point, I ran an office of 80-100 users off a mix of
100% ICA with IE as the only local app. They had a 10mb link back to the
corporate office but that link never saw over 30% utilization unless someone
was abusing the internet. Internet was centrally routed through corporate, so
I don't have a metric of how much was bandwidth used by IE for general internet
browsing. I ran another office of about 30 users with the same ICA/IE mix and
centrally routed internet off a 3mbit link and typical load was about 30-40%
usage on that line.
I abandoned fighting with the UPD and native drivers and purchased triCerat
ScrewDrivers and it was, hands down, the best thing I did for my Citrix farm,
thus printing was centralized. My farm wasn't massive, at 7 servers, but it
was still a pricey up front investment, but it was worth every penny.
-----Original Message-----
From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of
Angela Smith
Sent: Wednesday, July 16, 2008 7:48 AM
To: thin@xxxxxxxxxxxxx
Subject: [THIN] Citrix WAN design - the ultimate design
HI
I have the fortunate situation where I have the opportunity to redesign our
company WAN links / Citrix design. Is there a best practice for numerous small
branch offices (10 - 40 users)? We have 30 sites around the country connected
via frame relay links. If you had the opportunity to design your farm from new
how would you do it??. Application use is fairly simple (Office, Outlook etc).
Im not looking for assistance on Citrix farm numbers, more high level.. This
is what Im thinking:
4Mb WAN links from Head Office to all sites (direct, not via other branches)
Centralised Print Server in Head Office Citrix Presentation Server 4.5 Tricerat
ScrewDrivers for Printing
Would this be a good start? Would anyone add Citrix WANScalers also or would
4Mb links be sufficient for sites with 40 users or less?
Am I on the right track?
Thanks
Ang
_________________________________________________________________
Windows Live Messenger treats you to 30 free emoticons - Bees, cows, tigers and
more!
http://livelife.ninemsn.com.au/article.aspx?id=567534************************************************
For Archives, RSS, to Unsubscribe, Subscribe or set Digest or Vacation mode use
the below link:
//www.freelists.org/list/thin
NEW! Follow Thin List on Twitter!
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
HOT! Thinlist MOBILE Feed!
http://thinlist.net/mobile
Thinlist quick pick
http://thinlist.net
************************************************
************************************************
For Archives, RSS, to Unsubscribe, Subscribe or
set Digest or Vacation mode use the below link:
//www.freelists.org/list/thin
NEW! Follow Thin List on Twitter!
http://twitter.com/thinlist
Thin List discussion is now available in blog format at:
http://thinmaillist.blogspot.com
HOT! Thinlist MOBILE Feed!
http://thinlist.net/mobile
Thinlist quick pick
http://thinlist.net
************************************************
Other related posts:
