Paul Ferguson wrote: > New PC built comprising of the following components: [cut] > Basically, it keeps locking up solid. The OS boots up and then at a > random point in time (usually within 5 minutes) it locks solid. > > Is that PSU man enough for the job ? It's not exactly beefy. I'm running the same case with a P4 2.8, 1Gb RAM, 5900XT, 36Gb Raptor, 120Gb Samsung 7200rpm, a Samsung DVD/CDRW combo, and a Liteon Dual Layer DVD writer. I'm hitting the limit of the 12v on the PSU though, because if I crank the speed on the CPU up to 3.5GHz, the 12v drops wildly. I recon this machine when running full melt could use a good 25A of 12v - more than the Antec supply is capable of. > I know the 3200+ can run stable in that model of board as my sons machine > has been running one for weeks now and it's rock solid as well as very quick > but then again, he has a bigger PSU I doubt it's the PSU to be honest, the XP3200 doesn't draw much current compared to the P4. You've sacrificed 3 virgin chickens on the first full moon on the summer, and prayed to the driver gods of VIA, I'm assuming? Andrew