[TechAssist] Re: zenith tv had raspy sound now just buzz
- From: "Shoreline Electronics" <jstielau@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sun, 25 Nov 2001 11:49:12 -0500
Al,
Change that mute transistor!
Jeff Stielau
Shoreline Electronics Repair
125 Beechtree Lane
Westbrook,CT 06498
860-399-1861 Voice
860-664-3535 Fax
jstielau@xxxxxxxx
----- Original Message -----
From: "al m" <ampm@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Cc: <techassist@xxxxxxxxxxxxx>
Sent: Sunday, November 25, 2001 12:35 PM
Subject: [TechAssist] Re: zenith tv had raspy sound now just buzz
>
> i plugged set in today and it works. sound is normal. anybody see this
> before
> al marquardt
> ampm@xxxxxxx
> ----- Original Message -----
> From: <gulftech@xxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Cc: <techassist@xxxxxxxxxxxxx>
> Sent: Saturday, November 24, 2001 6:22 PM
> Subject: [TechAssist] Re: zenith tv had raspy sound now just buzz
>
>
> >
> > Al,
> >
> > Check to see if you have a mute transistor (Q801??) 121-975A. If it's
> > leaky, replace it and the five caps nearby. I didn't and the
replacement
> > failed in about 3 months.
> >
> >
> > Ken Smith
> > Gulf Technical Services
> > 3034 Gulf Breeze Parkway
> > Gulf Breeze, FL 32561
> > 850-934-8324 (Voice) 850-932-0819 (Fax)
> >
> > -----------------
> >
> > On Sat, 24 Nov 2001 16:52:06 -0400 "GARY & JUANITA"
> > <GJCHAMBERS@xxxxxxxxxxx> writes:
> > >
> > > i would ck several capacitors in that area. is a possibility.
> > > gary
> > > Gary Chambers
> > > Chambers T V
> > > Bradenton,Florida
> > > Since 1982
> > > ----- Original Message -----
> > > From: "al m" <ampm@xxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Saturday, November 24, 2001 3:52 PM
> > > Subject: [TechAssist] zenith tv had raspy sound now just buzz
> > >
> > >
> > > >
> > > > model # ss6591w 9-958 main 9-968 power. unit had garbled sound i
> > > put audio
> > > > in on pin 19 of ic 1201 and i get audio. put if signal in good
> > > picture bad
> > > > audio. no manual, no sams, has anyone had this problem before. i'm
> > > leaning
> > > > toward ic1201. changed both 4.5mh filters. thanks for any help. al
> > > m
> > > >
> > > >
> > > > =================================
> > > > Help make your TechAssist database better!
> > > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > > > =================================
> > > > To UNSUBSCRIBE your email address, click here:
> > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > >
> > >
> > > =================================
> > > Help make your TechAssist database better!
> > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > > =================================
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > >
> >
> > ________________________________________________________________
> > GET INTERNET ACCESS FROM JUNO!
> > Juno offers FREE or PREMIUM Internet access for less!
> > Join Juno today! For your FREE software, visit:
> > http://dl.www.juno.com/get/web/.
> > =================================
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > =================================
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> >
> >
> >
>
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
