Came in with shorted HOT found bad solder on driver transformer but Not to where it should of shorted the HOT. After replacing with org. p/n 87290434 (2sc5426) I was not ok with the way it was to touch. Running quite a bit to warm almost to hot. Fix was to replace c390 (.47uf 50v). Know running at a very confortable level to the touch. I removed the cap. and checked it on my sencore LC3, Measured perfect even on leakage. Replaced it anyway with a 105 D Hi temp. Somtimes you just can,t trust a checker. John Conti,s TV Texas _________________________________________________________________ On the road to retirement? Check out MSN Life Events for advice on how to get there! http://lifeevents.msn.com/category.aspx?cid=Retirement ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/