[TechAssist] Re: panasonic vcr
- From: "Shoreline Electronics" <jstielau@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 31 Oct 2001 09:06:58 -0500
If it was a switch problem , when you press the record button the tape would
probably just eject or you'd get an error.
Jeff Stielau
Shoreline Electronics Repair
125 Beechtree Lane
Westbrook,CT 06498
860-399-1861 Voice
860-664-3535 Fax
jstielau@xxxxxxxx
----- Original Message -----
From: "albert marquardt" <ampm@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, October 31, 2001 11:00 AM
Subject: [TechAssist] Re: panasonic vcr
>
> second try on this baby, please read below
> al marquardt
> ampm@xxxxxxx
> ----- Original Message -----
> From: albert marquardt <ampm@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Monday, October 29, 2001 1:49 PM
> Subject: [TechAssist] panasonic vcr
>
>
> >
> > model # pv-v4520. won't record. unit doesn't even record snow, because i
> > tried recording over a recording. the record switch checks ok, my
question
> > is there voltage supposed to be on one leg of the switch. i measure .3
on
> > both sides.no manual,just guessing,the switch should have voltage on one
> > side? thanks for any help.
> > al marquardt
> > ampm@xxxxxxx
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
> >
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
